Wheel Bearings are the means by which axles and wheels are supported and able to turn freely, with minimum friction and whilst simultaneously carrying the entire weight of the vehicle.

They are therefore a critical element of your car's drivetrain and a wheel bearing failure can be catastrophic, as it will usually result in the axle or wheel collapsing and detaching from the car. Because wheel bearings are usually hidden, it is often a forgotten component in the vehicle, so proper maintenance and regular inspection is important.

If you are unaware of any unusual noises or symptoms, be sure to alert the team at A1 Precision Automotive  in Katoomba so they can investigate thoroughly.

Peace of mind: Not only are we a Repco Authorised Service Centre, but we have a combined 20 years of experience on our team. From large jobs to small, you know you are in good hands with our mechanics.

Ongoing Training: As part of the Repco family, our mechanics are offered training seminars and received service bulletins about the latest diagnostic equipment and vehicle upgrades.

Friendly Service: We are not just a shop, but a locally owned and operated community of mechanics who are looking out for our neighbours.

Repacking and adjustment of wheel bearings (where applicable)

Wheel bearing failure: symptoms and causes

The wheels on your vehicle need to operate in a smooth manner, regardless of surfaces and speeds. When there is damage to the wheel bearings, the drive is no longer smooth as friction will build up. This friction can then break down the wheel bearings and cause wear and tear on the axle.

A1 Precision Automotive  can give you peace of mind by advising you what is causing the loud noise or vibration in your vehicle. It may be time to come in and see our mechanics if you are experiencing any of the following symptoms:

Damaged or leaking seal on the wheel bearings

For wheel bearing replacements and routine maintenance in and around Katoomba contact our team at A1 Precision Automotive .

For wheel bearing replacements and routine maintenance in and around Katoomba contact our team at Precision Automotive.

Wheel bearing inspection and replacements in Katoomba

When thinking of brakes, always avoid leaving it until brake repairs are actually needed.

Regular inspections like our 65 point vehicle report, which is included with any full car service undertaken by A1 Precision Automotive , are important for confirming your car's braking system is functioning well. Our qualified service staff will be able to alert you when there are any signs that service or repair of the braking system is recommended so it doesn't lead to a real problem.

Brake services we offer at A1 Precision Automotive  include:

Rotor And Drum/Brake Disc Resurfacing or Machining

If you detect any sign that indicates that your braking system might require repair or service it's easy to book online to get the brakes of the vehicle checked through our Katoomba car service workshop today.

When thinking of brakes, always avoid leaving it until brake repairs are actually needed. See the team at A1 Precision Automotive  for all brake maintenance and repairs

Brake service and repairs in Katoomba

What's stopping you? Hopefully, your brakes...

If you're finding your car rocking and rolling when you turn a corner, there might be an issue with your brakes. A Safe-T-Stop test will soon have your braking back on track.

The braking and suspension system of your car play an extremely vital role in the effectiveness of your car stopping quickly and securely, particularly when you truly need it to. This is why we have invested in a state of the art Safe-T-Stop testing machine and we are an approved Safe-T-Stop Testing Centre.

Unlike a basic road test, the Safe-T-Stop tests your car’s brake performance under real-life conditions. A detailed report is generated with results of the inspection which will enable the technicians at A1 Precision Automotive  to advise on any critical adjustments that need to be made.

A Safe-T-Stop test is carried out on the electronically accurate PlateTronic test equipment. Safe-T-Stop test lanes measure and simulate a vehicle's brake performance in real-life conditions, exactly as it would happen in an emergency stop on the road!

Safe-T-Stop - Committed to Safer Motoring

Along with the peace of mind that comes from knowing that your car will stop straight and in the shortest possible distance in an emergency, having your braking and suspension system in peak operating condition help you save money by minimising tyre drag and tyre wear which can increase fuel costs.

Book your Safe-T-Stop test online or call A1 Precision Automotive  today.

Find out more about Safe-T-Stop Testing at http://www.safetstop.com.au/

Safe-T-Stop Brake testing in Katoomba

Brake fluid plays a crucial role in the safety of your vehicle by transferring the pressure you apply to the brake pedal to the actual brakes. Without it, your brakes simply wouldn’t function, and as everyone knows, a car without brakes is incredibly dangerous. Even slightly compromised brakes can pose a serious risk.

Brake fluid has a tendency to absorb moisture over time, which can compromise its effectiveness. Brake systems generate high temperatures, and brake fluid is specifically designed to have a high boiling point to prevent it from evaporating. However, when too much moisture builds up, the boiling point is lowered, making the fluid more prone to boiling under heat. This can lead to reduced brake fluid levels, ultimately affecting your vehicle’s braking performance and increasing stopping distances.

Why Is Brake Fluid Replacement Necessary?

In addition to reducing effectiveness, moisture-contaminated brake fluid can lead to corrosion within the braking system. Over time, this can damage components such as the callipers, wheel cylinders, and anti-lock braking systems (ABS). Regular replacement helps to extend the lifespan of these parts and maintain optimal braking performance.

Brake fluid is hygroscopic, meaning it actively absorbs moisture from the surrounding environment, even through microscopic openings in the brake system. This is why regular maintenance is essential to ensure safety.

Your vehicle’s manufacturer will specify how often the brake fluid should be replaced—typically outlined in the logbook service schedule. At A1 Precision Automotive , we recommend replacing it every two years as a general guideline. However, it’s equally important to have it checked during each routine service. A professional mechanic can assess the moisture content in the fluid and check for any leaks or other signs of wear that might require earlier attention.

How Often Should Brake Fluid Be Replaced?

Yes, at A1 Precision Automotive , we provide a comprehensive 65-point vehicle inspection upon request with every full service. This includes a detailed review of your brake fluid, master cylinder, front and rear discs and pads, callipers, cylinders, and more. Our expert mechanics will assess the condition of your braking system and notify you if the brake fluid needs replacing or if any additional brake system repairs or maintenance are required. Regular checks can catch problems early, ensuring your safety on the road.

Maintaining your brake fluid is an essential part of car ownership, and neglecting it could lead to costly repairs or, worse, compromised safety. If you’re due for a brake fluid replacement or simply want peace of mind, book a service with A1 Precision Automotive  in Katoomba. Our team will make sure your braking system is in top condition, so you can drive with confidence.

Learn why brake fluid is essential for your vehicle’s safety, how it works, and why regular maintenance by A1 Precision Automotive  is crucial for optimal braking performance and to prevent costly repairs.

Brake Fluid: What It Is and Why It Matters

Brake Fluid: What Is It and Why Do You Need It?

Do you drive an Automatic vehicle? Then you might not even be aware that there is a clutch in your vehicle. Without it, the gears in your car will not change.

A1 Precision Automotive  in Katoomba know all about repairing and servicing these systems including clutches, cables and fluids. Learn more below.

The clutch is one of the most important elements of your vehicles driving operation. Your engine is what causes your wheels to spin, but what happens when your car needs to stop? The engine shouldn't stop spinning but the wheels need to. It's the clutch that allows this to happen. The clutch allows the transfer of power from the engine to the wheels to be interrupted while a gear is being changed or while the car is stationary and the engine continues to run.

Some vehicles have hydraulic clutches - when you press the clutch pedal, the clutch fluid moves the pressure from the pedal through to the clutch and disengages the power transmission. Leaking clutch fluid can cause all kinds of problem in your vehicle so it is very important to monitor it regularly. At A1 Precision Automotive  in Katoomba we check your clutch fluid, hydraulic system or clutch cables for you in the course of our free 65 Point Vehicle Inspection - which you can request as part of every car service.


You should have your clutch inspected if:

What signs to look for if your clutch is not performing

You notice a burnt ‘toast' or ‘burning rubber' smell in your car, or smoke from under vehicle

Your vehicle is slipping out of gear for no reason

Your clutch is not disengaging fully, or your clutch is sticking or shuddering

If your clutch is showing any of the problems above - it could mean any number of faults. Clutch problems are difficult to diagnose by symptoms alone because many issues cause the same symptoms, depending on the vehicle and type of engine. The best way to deal with clutch shuddering, slipping or noise is contact your local mechanics at A1 Precision Automotive  today.

We can perform clutch diagnostics, service and repairs on most makes and models right here in our Katoomba workshop.

The clutch is one of the most important elements of your vehicles driving operation.

Grinding Gears? - It could be your Clutch Fluid

When it comes to brakes, you should never wait until brake repairs are necessary.  

Proper testing and routine checkups, such as our 65 Point Vehicle Inspection which we provide with all full car services, are important to ensure your vehicle's brake system is in top condition. Our expert team of technicians will be happy to advise you when they suspect that service or repair of your brake system is indicated to stop it becoming a bigger issue.

Brake services we perform at A1 Precision Automotive  include:

Brake Disc/Rotor and Drum Resurfacing or Machining

If you recognise any symptoms that your car's braking system could possibly need service or repairs simply book online with us and have the brakes of your vehicle assessed through our Katoomba workshop today.

When it comes to brakes, you should'nt wait until brake repairs are necessary, get tested regularly.  

Brake and Clutch Service in Katoomba

Brake and Clutch

AAAA

ALPGA

AUVIS

IAME

MVRIC

MTAA

A1 Precision Automotive (MVRL31221) have been the trusted servicing centre for western Sydney motorists and visitors from the convenient Katoomba location at 12 Whitton Street for more than 30 years.

As one of the longest serving Repco Authorised Service Centres in NSW, Precision Automotive service all types of cars, including 4WD’s, new cars, utes, vans, trucks and vintage cars. We welcome you to stop by and have your car checked and repaired with care and expert knowledge. All repairs and parts are backed the Repco Authorised Service Centre Nationwide Warranty.

A1 Precision Automotive

Brake and clutch

Let's get started with your booking.

Related articles

Wheel bearing inspection & replacement

What's stopping you? Hopefully, your brakes...

Are you a Rock'nRoller?

Brake Fluid: What Is It and Why Do You Need It?

Grinding Gears? - It could be your Clutch Fluid